MX70 Stacking Chair Set of 20

The MX70 Stacking Chair Set of 20 combines a one-piece polypropylene shell with a high-tensile steel A-frame for classroom seating, school lunch areas and shared study spaces. The flint-grey frame and hard-wearing feet give the chair its distinctive, practical construction, while stacking up to 10 high helps staff recover floor space between sessions. Available with a 430mm or 460mm seat height and a choice of six colours, this pack provides 20 chairs in one selected height and colour for a coordinated school layout.

Practical seating for school dining and shared spaces

School lunch areas need seating that can be arranged around tables, cleaned after meals and repositioned for the next group. The MX70’s moulded polypropylene shell is practical for this sequence: pupils sit on the continuous seat-and-back component, while the steel frame supports it on four legs. There are no separate upholstered pads in this configuration, so the sitting surface remains accessible for routine wiping.

The two available seat heights make MX70 a choice for settings specifying larger school-chair sizes. Measure the table height, underside and leg spacing before deciding between 430mm and 460mm. Both versions have a stated overall width of 463mm and depth of 475mm, so those dimensions should be included when planning how many chairs fit comfortably along a table. Allow room for pupils to move their chairs backwards and leave their places.

For breakfast clubs or lunch spaces that double as study areas, a set of 20 can serve both uses. Clear food and drink, clean the seating and tables, then arrange the chairs for homework, reading or supervised group activities. Separate chairs offer flexibility around existing furniture, while their matching shells and flint-grey frames keep the overall appearance consistent.

Classroom activities and flexible learning layouts

The MX70 suits individual desk positions as well as shared classroom tables. Pupils can sit for written work, turn towards a group discussion or move to a practical task when the teaching arrangement changes. The one-piece shell forms the sitting and back-support surfaces; the high-tensile steel frame carries them as a complete chair that staff can lift and reposition.

At a project table, pupils might compare measurements, build a model, sort materials or explain a design to a partner. These activities offer opportunities for hand use, coordination, language and problem-solving. The MX70 supplies the seating for the task rather than creating those outcomes itself. Its value is in providing a consistent chair format that can remain useful across different subjects and room arrangements.

Select Black, Blue, Charcoal, Green, Leaf or Red. One colour is supplied throughout the pack, making the quantity and finish clear when ordering for a classroom or lunch area. Multiple sets can be planned separately where rooms need different colours or heights. Photographs of different options do not indicate a mixed assortment.

Choosing the size, caring for chairs and planning storage

Choose between a 430mm seat with overall dimensions H770 × W463 × D475mm and a 460mm seat with overall dimensions H790 × W463 × D475mm. Select against the intended users and tables rather than age alone. The stated load capacity is 133kg. That figure describes the chair’s load rating; it does not remove the need to assess the size and suitability of the seating for the individual user.

MX70 chairs stack up to 10 high, allowing this pack to be stored as two stacks of 10 or in smaller stacks where handling or room layout requires it. The hard-wearing feet are part of the chair’s everyday school specification. Lift and move chairs according to the setting’s procedures and inspect feet, shells and frames as part of normal furniture checks. Keep stacked chairs on level flooring, clear of exits, and do not allow pupils to climb on them. The supplied specification includes a ten-year warranty.

Why Choose MX70 Stacking Chair Set of 20?

The MX70 provides a robust shell-and-frame chair for lessons and lunch areas, with two larger seat-height choices and compact stacking. Its high-tensile steel A-frame, 133kg stated load capacity and hard-wearing feet are useful procurement details for frequently used rooms. A matching set of 20 helps schools plan a clearly defined seating allocation while retaining the flexibility of separate chairs.

Perfect For...

• School dining areas and canteens using a suitable chair and table height
• Breakfast clubs and rooms shared between meals and lessons
• Classroom desks, group tables and practical learning stations
• Schools furnishing a defined group with 20 matching chairs
• Flexible school spaces where stackable seating is useful

Product Features

• Set of 20
• One-piece polypropylene shell
• High-tensile steel flint-grey A-frame
• Hard-wearing feet
• 430mm or 460mm seat height
• Six colours
• Stacks up to 10 high
• Stated load capacity 133kg
• Ten-year warranty

Specifications

• Quantity: 20 chairs
• 430mm seat: overall H770 × W463 × D475mm
• 460mm seat: overall H790 × W463 × D475mm
• Colours: Black, Blue, Charcoal, Green, Leaf or Red
• Stacking: up to 10
• Load: 133kg
• Warranty: 10 years